Saturday, 26 November 2016

Citius, Altius, Fortius - Hervé Morvan's inaugural lecture

NSB was chuffed to find that the recent UoN Inaugural Lecture by Professor Hervé Morvan, Director of the Institute for Aerospace Technology and Head of Gas Turbine and Transmissions Research Centre has been posted onto YouTube. This post is based on the lecture, with some additional bloggage and linkage.

Prof Morvan began by explaining that the translation of the lecture title was the well known Olympic slogan "Faster, Higher, Stronger" before moving on to talk a little about Britany, the French region he grew up in. The Prof commented that he had a passion for comic books and illustrated novels and that, unlike fellow Gaul Obelix, he "doesn't need a potion to get energised".

Obelix and his Menhir

Prof Morvan started his UoN career applying Fluid Dynamics theory to hydraulic applications such as dams, water systems etc. An early collaborations with Donald Knight at Birmingham Uni on the "roughness" of river channels won the Schoemaker Award from the IAHR Hydraulics organisation. You can download the paper here and read more about this area of research at this UoN Page.

Rough flow...

...Smooth flow !

The Prof also worked on models of cataclysmic prehistoric floods in the Altai region of Siberia, where flows were in the region of 6-9million m3/sec, some 10,000 times as great as flows in a normal river. You can read the paper here.

Gigantic current ripples in Kuray Basin, Altai, Russia, as though a huge amount of fast moving water has flowed over this surface

Prof Morvan became involved with Rolls Royce around 2006, starting in hydraulics, then holding a RAEng industrial fellowship in 2008 before working at Rolls Royce for one day a week as a specialist until the responsibilities of the IAT and other efforts meant that Prof Morvan had to give up his Rolls Royce position.

Much of Prof Morvans work with Rolls Royce has been in the area of ensuring effective fluid cooling of the engine core, bearings and other areas. Computational Fluid Dynamics (CFD) models were important because should the fluid flow had dead spots, or did not reach certain areas, then there was a risk that these might overheat and fail.

To give a feeling for what a Rolls Royce Trent aeroengine has to deal with, Prof Morvan pointed out that a Rolls Royce Trent jet engine would typically take in 1.4 tonnnes of air per second.

The front fan sucks in the air, the turbine squeezes it, burns it then blows it out the back.
Turbines at the rear are spun by the exiting gas and power the fan and turbine at the front of the engine via the central shaft.

Alongside his Rolls Royce work, Prof Morvan became involved in a very different project in the lead up to the 2008 Olympics. This project involved helping Speedo to develop their LZR low-drag swim costumes and built on previous efforts started by the late aerospace engineer Barry Bixler, who became became interested in the subject when his daughter took up swimming. The costumes work use a number of techniques to reduce drag, including a foam layer that makes the swimmer more boyant and the use of elasticated panels that squeeze the body and reduce cross-section. The project involved analysing the swimming actions and shape of hundreds of swimmers, and then using CFD to see how the swimmers shape could be modified to reduce water resistance. More information can be found here, here, and here. Some of the Speedo patents are GB2444803 and GB2444804

Computer model of the Speedo LZR 

Looking at how technology has progressed, the Prof pointed out that fuel requirement per passenger was down some 70% since the days of the Comet, while engine noise has been reduced by some 70% in the same time period. The aero industry was not resting on its laurels, however, and has committed to significant further efficiency improvements, such as the roadmap by IATA and others to achieve a "50% reduction of the world air transport’s carbon footprint by 2050". These savings are hopefully going to be delivered by projects such as "Clean Sky 2" and "Horizon2020".

The Rolls-Royce composite carbon/titanium (CTi) fan blade under flight test as part of "Clean Sky"

A significant part of the talk gave an overview of how Prof Morvan and his team had spent several years researching fluid dynamics to improve their CFD models so that they do a better job of simulating the complex oil flow in engine areas such as bearing chambers. The challenge in this area is significant, as the model needs to replicate both thin films and pools of fluid, as well as how the oil interacts with high speed rotating machinery such as bearings.

You can read more about the (surprisingly long) history of fluid dynamics studies in this presentation by Andre Bakker. And there is an easy to understand comparison of computational and experimental fluid flow analysis techniques in this set of slides by Dmitri Kuzmin at Dortmund University.

Engine core cooling is vital, not least because the engine core is becoming more compact and the turbomachinery working at higher speeds and higher pressures and temperatures. The simulations Prof Morvan's team does are one step in the direction of right-first time digital design, which reduces the need for testing and shortens the design process, which is key to ensuring that Rolls Royce engines remain competitive. You can read one of Prof Morvan's latest papers, on the modelling of oil droplets in a bearing cage, here.

CFD simulation of two liquids with differing densities interacting

Prof Morvan then went on to talk about future developments, which he placed in two categories:

Firstly, there are future engine architectures, such as the Rolls Royce Ultrafan™ Engine, scheduled for introduction in 2025 (which means engine testing has to start in the next few years!). This is a geared design, which allows the bypass fan to operate at a different speed to the core. This, in turn, gives the core freedom to run smaller, faster, hotter and more efficiently. The engine aims to offer at least 25 per cent improvement in fuel burn and emissions against the current baseline. Prof Morvans team is using their transmission and modelling skills on this project.

Another engine architecture being considered is the "Open Rotor" concept (see also here), although this had a number of technical and certification issues to be overcome (in particular, how would a broken rotor be contained so that it did not hit the fuselage).

Geared fan in the forthcoming Ultrafan™

Rolls Royce Open Rotor design

The second area of future development related to the use of electric or part electric propulsion systems. Initial steps are being taken with the Airbus E-fan aircraft whose ducted fans are driven solely by battery power.

While E-fan has shown that electric flight is possible, it is not a revolutionary technology. Prof Morvan believes that the IAT has great ambition and capability for the next stages with its G2TRC and PEMC groups. Radical changes are likely with the progressive marriage of mechanical and electrical systems and a direction of travel towards all electric.

At present just a few percent of aerospace research effort is directed at electric propulsion but this is bound to grow ten fold and Prof Morvan's group intends to be a key player both nationally and internationally.

An Economist article describes how so-called "Distributed Electrical Power" architectures could dramatically change many aspects of aircraft design, efficiency and capability.

To see what is happening in the US, worth having a look a couple of NASA presentations (see here and here) - some remarkable stuff on the drawing board.

In Europe, Airbus and Rolls Royce are working on the "E-Thrust" project, which is a design study for a hybrid powered airliner.

With electrification, cooling remains a key concern (together with reliability), so the IAT expects to be contributing here also.

Airbus E-fan

Airbus E-Thrust hybrid airliner


Prof Morvan closed out the talk by commenting on forthcoming projects and the industrial infrastructure in the Midlands, commenting that:
"... the Midlands is doing very well, it's a good place [for centres like the ATI] and that is because universities are working with industry..."
The Prof commented that the region was the premier destination for CleanSky funding - with some 32milllion Euros coming into the area and added that the "Midlands Engine for Growth" was another positive factor in the areas favour.

These regional investments benefit not just the University of Nottingham, but also Loughborough, Warwick, Birmingham, Aston and Leicester Universities as well.

One nice touch that the Prof added to the talk was to randomly pop up images of famous aircraft and ask the audience, rhetorically, to identify them. These included the Dassault Super Etendard, legendary pilot Chuck Yeager, stills from "The Right Stuff" and the Mirage 2000 which Prof Morvan described as "the most beautiful aircraft, in my view, ever made".

The Right Stuff 

Prof Morvan has a blog at the University of Nottingham. In addition, you can read more about Prof Morvan's life and comments on industry in this rather nice interview. The following comments are taken from the interview and seem like a good way to close out this post:

"Make the most of any opportunity that is given to you. In a university, opportunities exist for initiative-takers, so go after things and make a difference; people will notice and you will go places. I have learnt from Rolls-Royce that as long as you deliver and can be trusted, your ideas can have a real future and make a difference.

Be flexible and adaptable, too. I wasn’t necessarily dead-set on solving a particular fluids problem when I arrived at Nottingham (I started on hydraulics in Civil Engineering!); I had fluid skills; I was very interested in aerospace; in energy and I made these skills available to the sectors, delivered for people, proved myself in the process I think and it has paid back. "

Related Content
Soyuz Soyuz TMA-15M / ISS 42 Launch
Apollo Programme Manuals
Interview with Prof Farouk El-Baz
Smithsonian Air and Space Museum
Background to the Space Shuttle

Image Sources
Obelix, Instability, Rough River, Smooth River, Altai, LZR, Jet Engine, Blade, Ultrafan, Open Rotor, E-fan, The Right Stuff, X57

Thursday, 24 November 2016

Talk : Ground Shakers and Feathered Flyers

Another informative guest post from @GavSquires (with linkage from NSB):

Between July and October 2017, a dinosaur exhibition comes to Wollaton Hall - "Ground Shakers and Feathered Flyers" Dr Wang Qi and Dr Adam Smith give a bonus talk at September's Skeptics in the Pub event to tell us all about it.

Wollaton Hall was built in 1588 and since 1926 it has been home of the Nottingham Natural History Museum. With over 40,000 fossils it is one of the largest provincial museums in the country. Next year, the Great Hall and Willoughby Hall will be home to some large dinosaurs and some scientifically important ones. The specimens are coming over from the IVPP in China and have been personally chosen by Wang and Adam. For some, it will be the first time that anybody outside of China has seen them.

Dinosaurs of China, coming to Nottingham

There is going to be a 3D mounted skeleton of a Gigantoraptor, so not the real bones but it is anatomically accurate. At 8 metres long by 4.5 metres high, this was the largest feathered dinosaur. The Microraptor was a much smaller species, which had feathers on its forearms and legs. These are genuine fossils, extracted in China and is actually a holotype specimen (the original example that was used when the species was formally described) With these, it's hoped that people's perceptions of what a dinosaur is.


Artist impression of a Microraptor
PNSO Artist: Zhao Chuang

Other specimens coming to Nottingham include the Sinraptor, which is not feathered. It's 7 meters long and is essentially a Chinese version of a Tyrannosaurus Rex. The Linheraptor specimens aren't real fossils but are flat casts that are then painted up. These dinosaurs were related the Velociraptor but were bigger (although not as big as the Velociraptors in Jurassic Park)

Artist impression of a Linheraptor

The Mei Long is a "sleeping dragon". At only 20 centimetres long, it is one of the smallest dinosaurs and they exhibit the same behaviour as sleeping birds. Guanlong was a meat eating dinosaur and was one of the early ancestors of Tyrannosaurus Rex. It had an unusual crest on its head that looked like a crown.

Mei Long Fossil

Artist impression of Mei Long

The north border of China, near the Mongolian border, was home to the Gigantoraptor. This area is now so well known for dinosaur discoveries that even the highways have sculptures of dinosaurs on them. In 2005, Tan Lin discovered the Gigantoraptor but only 50% of a complete skeleton has been found.

Later, a Japanese TV crew went to the area to film a documentary about finding Gigantoraptor. They set up a shot where they were pretending to discover it for the first time. They thought that they would be able to find the bone of something that had seen before but they actually found something brand new. The TV crew had to be escorted away so that this completely new discovery could be investigated.

The whole region is a goldmine of findings from the Cretaceous Period. Just south of the Gigantoraptor site, there are even more feathered raptors to be found. In fact there are so many samples and they are so easy to get hold of that local collectors could easily open their own museums!

For more information about the exhibit at Wollaton Hall and to buy tickets, visit the website:

[And to read more about the evolution of feathers in dinosaurs, get clicky here, here, here and here].

Related Content
The World in Ten Fossils, Fee- An autobiography

Image Sources
Giganoraptor, Microraptor, Linheraptor, Mei Long, Mei Long impression

Sunday, 13 November 2016

Great Central Railway 47292 and 8274

Sundays often sees the "Great Central Railway - Nottingham" heritage railway bringing one or more of its fleet out for a trip along the line. The line's engine sheds are located in Ruddington. NSB occasionally takes pictures of trains that are and has been digging into their history...

47292 Class 47 Diesel

Class 47  Diesel Engine 47292

Designed by Brush Traction, a total of 512 Class 47s were built in the 1960s at Crewe and the Brush Loughborough works.

They were powered by 12 cyclinder Suzler diesel engines manufactured by Vickers at Barrow in Furness (perhaps using some of that famous Lanarkshire Steel?). According to Chris Brooks, Vickers made some 1500 engines over a five year period, representing one of Suzlers largest single contracts.

There are currently some 32 Class 47's operating on various heritage railways in the UK.

LMS Stanier Class 8F Steam engine 8274

LMS Stanier Class 8F Steam Engine 8274

Some 852 of the Class 8F engines were built between 1935 and 1946 for freight use. Many saw use across the British Commonwealth during WW2.

The Class 8F's were built in a number of locations, with 8274 being produced by the North British Locomotive Company in Glasgow - at the time the largest locomotive manufacturing company in Europe and the British Empire. The company sold engines to customers around the world, including Canada, Argentina, Spain, Angola, Palestine and China. (Again, on wonders whether the engines were made with local Lanarkshire Steel.)

8274 was one of 25 exported as kits to Turkey in 1940 (although 7 were lost at sea en route), returned to UK in 1989 and then restored to operational condition. One of its sister engines can be seen in the Çamlık Railway Museum in Turkey (see also here)

Interesting to see the role that a single scrapyard in South Wales had in providing many of the engines for the Steam Heritage industry that sprang up following.

Image Sources
Full image of 47292 Related Content
Train Manufacture in Derby
History of Coal Mining in the East Midlands

Sunday, 6 November 2016

Social Science Show - Reality and Image

Interesting show at Wollaton Hall recently, as part of the ESRC's "Festival of Social Science". A few images and notes below...

Part of the show looked at how the mind reacts when visual inputs are messed about with. For example, some special goggles were on hand that shifted a persons vision so that what appeared to be straight ahead was actually slightly to one side.

An one might expect, if (while wearing the goggles) you try to touch a pencil held at arms length your finger will miss the target - but after a few goes your mind learns to compensate and ones aim gets better.

But take the goggles off and you start missing the pencil again until your mind recalibrates again

Image Shifting Goggles

Another section looked at the photographs and what makes them look "real", this has resulted in a photographic manipulation technique called "Fovograph" which aims to replicate the way people look at a scene - with higher resolution at the centre and with slight distortion at the sides. You can find out more about the at the Cardiff Metropolitan University website, which describes the project thusly:

"The main purpose of Fovolab is to better understand the nature of visual experience and how to depict it. We do this by combining knowledge and methods from the art, sciences and humanities, each of which has a role to play in solving the complex issues involved.

We have developed a process called Fovography that overcomes these limitations. It allows us to capture the full field of view (hence the prefix ‘fov’) and present it on a flat surface in a way that appears natural to human perceptions. Moreover, because we represent the human visual field in a natural way the resulting images appear to have much more breadth and much more depth than conventional images. This means we can create, in effect, 3D visual experiences without glasses, goggles, or expensive screens."

Fovography didn't really work for NSB because what NSB prioritises in an image is resolution, focus and being distortion free. But looking at what other people thought of the images suggests that this was a minority view.

You can vote on how the images look yourself at a survey page at Cardiff University.

Related to this were some images by artist Robert Pepperell who attempted to produce drawings that showed what he was actually seeing - complete with lack of focus in peripheral vision - in comparison to a photo of the scene.

Image of room and Pepperells's perception of it - Interesting stuff

There was also an interesting section where people, young and old, could take part in a "Stroop Test" to see how capable their mind was of ignoring background audio when asked to identify the colour of blocks appearing on a screen (so, for example, avoiding identifying a green block as blue just because a voice through the headphones says "blue".

The aim of the project was to see whether the ability to ignore distractions changes with age, and whether the effect is greater with written or spoken distractions. Rebeccca Hirst, researcher on the project explained to NSB how this was an interesting area of research, with many factors in play - for example, children tend to be rather susceptible to spoken distractions, while adults may have some ability (through experience) to "tune out" some distractions. Rebecca also explained how the project took care to account for variables such as the decline in hearing ability with ageing.

The project is supervised by Harriet Allen whose description of the project comments that:

" I research the links between vision, attention and ageing. How does an instruction to attend to an item get translated into the visual system? How do changes in goals (for example, to do with food, or clinical state) change this? Attention might enhance vision in a number of ways. Attention might simply speed up how quickly we respond to a stimulus, it might make us more likely accept that a stimulus is present, it might reduce the noise associated with the stimulus or increase the signal perceived from the stimulus...

...As well as being interested in the effects of attention on vision, I’m interested in how these change with age. If we try to look for our friend arriving at the station, we could enhance the representation of any new person arriving on the scene, we could suppress the representations of people and things already visible, or both."

You can read more about this subject in a paper by Maria J S Guerreiro et al entitled "The role of sensory modality in age-related distraction: a critical review and a renewed view."

Do you want to try the Stroop Test?

Elsewhere there a display looking at stereo vision, which included "Magic Eye" images and a pair of glasses (a "Wheatstone Stereoscope") that had mirrors which gave one vision as though your eyes were further apart - this had the effect of increasing perception of depth of field.

A paper by Jenny Read fron the University of Newcastle entitled "What is stereoscopic vision good for?" was also available, and is well worth reading.

Related Content
Talk : Cochlear Ear Implants
Talk : The Flavour of Food
Science in the Park 2013 - Pt1